About This Archive  | DCHAS-L 2012 Index   | DCHAS-L Yearly Index   | DCHAS-L Home Page
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Re: [DCHAS-L] Moldatherm furnace concerns
Date: October 13, 2012 1:44:35 PM EDT
Author: Carlos Rentas Jr 		Next by Date:
Subject: Re: [DCHAS-L] Moldatherm furnace concerns
Date: October 14, 2012 10:58:02 AM EDT
Author: "Bristol, John (JR)"

(Note: This post is 13 years old and may contain outdated information.)

From: Ken Simolo <simolo**At_Symbol_Here**CHEM.CHEM.ROCHESTER.EDU>
Subject: Re: [DCHAS-L] Advice on our new science building
Date: October 13, 2012 2:43:22 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <B2C0C27B26CA4916B48190AE799E6023**At_Symbol_Here**hplap>


One of the sensors in the Green Hoods is a wet cell that I believe is used for measuring acidic gases.  It has a PM schedule for being replaced every 2 years.


Ken


On Oct 12, 2012, at 9:41 PM, Ed Huffman wrote:

Are there electronic sensors for acid gasses.  We are using Dragger tubes to check for breakthrough and would like a continous sensor.\

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.
--Apple-Mail=_20EDEC10-4161-4FCB-8F10-E33C65D72E45--